|
505E Protector Packs |
For Protection Of Data
Network Equipment, Workstations,
LAN, Hubs, and Routers |
|
Porta Systems offers UL listed low voltage protection for data communication circuits.
The modular, 4-pair 505E protects networks from
transients that can harm sensitive electronic equipment.
Designed for data networks operating
below 7.5, 18, or 27 Volts, these protectors provide optimum performance
at transmission speeds up to 100 MHz..
One Pin Replacement Modules are also available. |
|
|
Dimensions:
|
|
|
|
Pack Only |
|
4
w/o DIN rail |
1.3" x 3.9" x 3.5"
(3.3 cm x 9.9 cm x 8.9 cm) |
| |
|
|
With Supplied Mounting |
|
4
w/DIN rail |
4.4" x 3.9" x 3.5"
(11.2 cm x 9.9 cm x 8.9 cm) |
8
w/DIN rail |
4.4" x 3.9" x 3.5"
(11.2 cm x 9.9 cm x 8.9 cm) |
12
w/89E bracket |
5.0" x 3.9" x 4.9"
(12.7 cm x 9.9 cm x 12.5 cm) |
32
w/89D bracket |
10.5" x 3.9" x 4.9"
(26.7 cm x 9.9 cm x 12.5 cm) |
|
Features:
- Low capacitance Solid State technology provides
protection transparent to frequencies
up to 100 MHz for CAT 5E performance
- Mounts directly on DIN rail or may be mounted on
industry standard 89 style standoff brackets
- Standoff brackets included with 12 and 32 pair blocks
- DIN rail mounting included with 4 an 8 pair blocks.
- Cover included
- 110 Termination
- Designed for use in an enclosure
- Available factory loaded with 7.5V, 18V, or 27V Solid
State modules
- 4-pair modular design allows for easy custom
configuration
- UL 497, UL 497A , and UL 487B Listed for Primary,
Secondary, and Isolated Loop Circuit protection
|
|
Circuit Diagram: 
|
|
Specifications:
|
|
|
Ordering Information:
|
Pairs
|
Term.
|
Mounting |
7.5 Volt
|
18 Volt
|
27 Volt
|
|
|
|
DIN Rail |
|
|
|
|
|
|
DIN Rail |
|
|
|
|
|
|
89E Standoff Bracket |
|
|
|
|
|
|
89D Standoff Bracket |
|
|
|
|
